Audi TT Forum banner

Pics of TTs with TPI 12/15mm spacer kit - anyone help?

537 views 10 replies 8 participants last post by  MrHooky 
#1 ·
Ideally wanted to go 10/15 front/rear but the TT shop has a good deal on the 12/15 TPI kit. I've heard it's a good kit but anyone care to share any pictures with the kit fitted. I'm a bit concerned my front wheel is going to poke out too much for my liking,

I know it's only 2mm more but it's bugging me…

Thanks in advance.
 
#6 ·
Hey Hooky.
Mine's on H&R spacers....10mm F and 15mm R (note that's PER SIDE :) ).

http://www.********.co.uk/forum/gallery/image.php?album_id=181&image_id=435
http://www.********.co.uk/forum/gallery/image.php?album_id=181&image_id=420

An extra 2mm at the front either side wouldn't do any harm. The wheels won't poke out at all otherwise that's an MOT failure!! They'd prob fit nicely flush to the front wing.

Hope that helps?
Dom
 
#7 ·
Hi

I have 12/15 TPI kit...works like a charm 8) 8)
http://www.********.co.uk/forum/garage.php?mode=view_image&image_id=3117
http://www.********.co.uk/forum/garage.php?mode=view_image&image_id=3118
 
#9 ·
I have 12/15 tpi on mine from TT shop but mines a MK2. Nicer spacers thou and light. I paid full price :-/

I had 10/15 on the mk1 and sat perfectly so 2mm should be fine. Before you buy them (can't recommend him enough) give Charlie a pm, he gets great prices on spacers!
 
#11 ·
Thanks for all those pics guys.

Dom - your car looks spot on. Like you say 2mm isn't going to make too much difference. What offset are those RS4 wheels though? Mine are 8J ET33. Are the RS4s 8J too? The standard V6 7 spokes are 7.5J
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top