Terry63's Profile
Have a badger 5 TIP but am struggling to fit the oem airbox there just doesn’t seem to be any room ... I have a cone filter on at the moment but I just don’t like the noise it makes any tips for making fitting of oem airbox easier
Sent from my iPhone using Tapatalk
 |
 |
Badger 5 / oem airbox
Moderators: John-H, DXN, Ikon66, T3RBO, Hoggy
25 posts
• Page 1 of 2 • 1, 2
TT Forum Established Member 
Posts: 296
Joined: 23 Apr 2018, 21:11 Location: Stevenage herts |
 Posted: 20 Jun 2018, 17:18
|
 Too Much Time On My Hands 
Posts: 5407
Joined: 19 Jun 2015, 16:46 Location: Kent |
Posted: 20 Jun 2018, 17:32
It will fit, but the TIP needs trimming to make it work, or make a cylinderical enclosure for the filter to sit in, non offensive to the ears but does not impdede performance imo.
|
|
Posted: 20 Jun 2018, 18:31
you need to trim it if there is a heat shield too, otherwise the TIP compresses. dont trim the turbo end, you might want to leave the bottom loose until you rotate it into a relaxed position, when I just had a cone filter on the end of the tip it looked much more comfortable.
you could do what I did and put some foam on the bonnet above the heat shield to try and shield some of the sound. |
|
|
Posted: 20 Jun 2018, 18:52
Get a sharp knife and cut off an inch or so at the MAF end. You can cut nearly a perfect circle if you use your MAF and a jubilee clip as the 'stencil'.
400bhp+ ✅
Weight 1320KG ✅ 300bhp/tonne+ ✅ Build took 2 years+  ✅My build thread: https://www.ttforum.co.uk/forum/viewtopic.php?f=2&t=1308217 |
|
|
Posted: 20 Jun 2018, 18:52
Get a sharp knife and cut off an inch or so at the MAF end. You can cut nearly a perfect circle if you use your MAF and a jubilee clip as the 'stencil'.
400bhp+ ✅
Weight 1320KG ✅ 300bhp/tonne+ ✅ Build took 2 years+ ✅My build thread: https://www.ttforum.co.uk/forum/viewtopic.php?f=2&t=1308217 |
|
Too Much Time On My Hands
Posts: 5407
Joined: 19 Jun 2015, 16:46 Location: Kent |
Posted: 20 Jun 2018, 19:41
You can say that again  , i tried that did'nt work for me so install a huge cone filter instead then made a enclosure for it to keep the racket down
|
TT Forum Established Member
Posts: 296
Joined: 23 Apr 2018, 21:11 Location: Stevenage herts |
Posted: 20 Jun 2018, 21:00
Hi mate got any pics of the enclosure |
 Too Much Time On My Hands 
|
Posted: 20 Jun 2018, 21:05
im still to do this to mine after having it on the car 12 months, lol
but then i dont really feel like chopping it, makes selling it easier if i ever do, plus what performance gains are involved, if any ? Audi BBTTT MK1 / K418T / 309 B.H.P / 298 Torque / Tuned By WAK / Audio By P.S sound
|
Too Much Time On My Hands
Posts: 5407
Joined: 19 Jun 2015, 16:46 Location: Kent |
Posted: 20 Jun 2018, 21:50
Got pics but it's so simple to put in words, have a look at the forge mk4 r32 induction kit, the cylinder part of the kit i made from a sheet of black plastic, it's a snug fit over k&n s2000 filter |
Posted: 20 Jun 2018, 22:18
for someone with a beach buggy hybrid turbo, if you really dont believe the oversized TIP adds anything put back the stock one and get it mapped to see if it reaches the 309bhp you have? |
|
Too Much Time On My Hands
|
Posted: 20 Jun 2018, 22:35
quite right too, but i was meaning the cutting of the tip, as suggested on this very topic. 
Audi BBTTT MK1 / K418T / 309 B.H.P / 298 Torque / Tuned By WAK / Audio By P.S sound
|
|
Posted: 20 Jun 2018, 22:43
Aha... I needed to trim mine to fit otherwise out was kinked.
|
|
 Too Much Time On My Hands
Posts: 2636
Joined: 30 Mar 2018, 12:59 Location: Your Mums bed! |
Posted: 21 Jun 2018, 07:56
No trim needed on mine
 Sent from my SM-G930F using Tapatalk Going for 300bhp with just bolt on upgrades.
|
Too Much Time On My Hands
Posts: 5407
Joined: 19 Jun 2015, 16:46 Location: Kent |
Posted: 21 Jun 2018, 14:44
[quote="HOGG"]No trim needed on mine
That'll be down to the space saving air filter that you've fitted
|
|
Posted: 21 Jun 2018, 14:55
also HOGG got his TIP all the way up to the MAF Sensor - do you not have a lip? <-- that is not supposed to sound like a "and that's what she said moment"
|
|
25 posts
• Page 1 of 2 • 1, 2
Return to TT Forum - MK1 TT (8N)
Who is online
Registered users: 237tonybates, 47yellow, acerimmer, BadgerTT, barry_m2, benckj, Bing [Bot], coolwater, dave_39, davebowk, Djdb, DST, elpengo, FJ1000, Flyboy02, GingerPrince, Google [Bot], Google Adsense [Bot], Google Feedfetcher, horror, HuwTT, IRL_TTRS, JonoRS, kevin#34, knifehim, lukeyboi89, macaddict111, Majestic-12 [Bot], manaudi, mark306, Mehdi TT, MK3_J33CHO, mkw007, moro anis, Mr roadster, mrphengyang, NickA555, piti, Portent, Relaxed Al, rodstew, salsajason, sharrkey, StuartDB, surfer8210, tadope, torqueit, Trig
| ttforum.co.uk is an independent Audi enthusiast website owned and operated by VerticalScope Inc. Content on ttforum.co.uk is generated by its users. ttforum.co.uk is not in any way affiliated with Audi AG |