Audi TT Forum banner

HomeLink for Garage Door Opener - Retrofit Possible?

8K views 37 replies 10 participants last post by  SwissJetPilot 
#1 · (Edited by Moderator)
Just curious if anyone has retrofitted a HomeLink garage door opener system into their Mk2 TT?

I would imagine this is not just an easy "plug and play" DIY project... :unsure:

Looks like this will also require a bit of re-wiring and possibly some coding required too, but at least there seems to be plenty of sources for the part and cable kits.

1/8/2023 Update - More information on how to select the right part numbers and verifying transmitter frequencies that will work in your location. Link here.

HomeLink
Homelink.JPG

Homelink-01a.JPG

Homelink-01.JPG

Homelink-02.JPG

Homelink-03.JPG

Homelink-04.JPG

Module.JPG

Cable Wire Font Electrical supply Fashion accessory

Automotive lighting Font Jewellery Personal protective equipment Circle
 
See less See more
9
#29 ·
These wired/plug in remotes are all great, until you need to close/open the garage with the car in there. You're still gonna need a key fob!
We have multiple devices so a remote that duplicates various control commands is important for us, we use these little fellas from eBay, around £20 and operate faultlessly.

Would love to do the Homelink, but it seems more trouble than it is worth.
Body jewelry Font Jewellery Rectangle Electric blue
 
#38 · (Edited by Moderator)
For anyone who has a Schellenberg garage door/gate opener, the 60859 Wireless Sender just fits under the ashtray lid when it's completely closed. I had to push the top edge of the sender down just a bit to get the ashtray lid to slide over it, but it fits. To operate, one only needs to open the lid enough to press the button. There's no need to completely open the lid.

Very simple to program; press "CODE" button on the garage unit, hold the button on the wireless sender until the LED flashes and that's it. Easy peasy. :)
Closed.JPG

half.JPG

Open.JPG
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top