[peter-ss]

In anticipation of lots of questions about how to alter the clock I've copied the following from my Audi TT Owners Manual.

Digital Clock and Date

The vehicle is equipped with either a radio-controlled clock or normal quartz clock with date display.

Setting the hour
Pull the adjuster button (the hour display will flash). Then turn the button to the left or right to alter the hour.

Setting the minutes
Keep pulling the button briefly until the minute display flashes.
Then turn the button to the left or right.

Setting the date
Keep pulling the button briefly until the day, month or year flashes.
Then turn the button to the left or right.

Switching the date display on and off
Keep pulling the button briefly until the date display flashes.
Then turn the button to the left or right.

When the display stops flashing, this means the setting you are performing is completed and the time and date have been successfully stored.

 

[basky]

Nicely anticipated Pete and and a good time to do a maff reset at the same time, whilst playing about with the clock

 

[hoss]

I had my battery disconnected last week to install something, and since then my clock is not picking up the radio signal (symbol is not there)
The manual says something about the clock trying for a signal, then giving up & going into manual mode.
But it doesnt say how to get it to re-look for the radio time code. May try another battey cut ....