Audi TT Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
561 Posts
Discussion Starter · #1 ·
hi everyone,
i keep looking at the oil stains around the injector seals thinking i'll do them soon,problem is they look really easy to do but having done lots of jobs like that i know they won't be.
has anyone done these before ?,can you give me an idear of what is involved,problems,pitfalls,parts needed,all advise greatly exepted,thanks,oh also would you loose boost because of this or is it to minimall to worry about,thanks again
 

·
Registered
Joined
·
561 Posts
Discussion Starter · #2 ·
please anyone :( :(
 

·
Registered
Joined
·
561 Posts
Discussion Starter · #3 ·
anyone [smiley=bigcry.gif] [smiley=bigcry.gif]
 

·
Premium Member
Joined
·
564 Posts
Take off engine cover. Pop plastic wiring holder off fuel rail. Pull small boost hose off fuel pressure regulator. Undo the 2 5mm allen key bolts holding the fuel rail on. Fuel rail with injectors will now pull up. Then just change the o-rings on the injectors.

Alex
 

·
Registered
Joined
·
561 Posts
Discussion Starter · #5 ·
thanks alex,that can be my next job [smiley=thumbsup.gif]
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top