Audi TT Forum banner
1 - 5 of 5 Posts

775 Posts
chrishTT said:
right ive had the kit from forge
but dont know how to do it

kit has a metal cup (PISTON)
bag of red stuff (GREASE)
and black rubber rings (SEALS)
any ideas
unscrew the top of the DV, take the spring and piston out,
clean out all the old grease and crap,
take the old seal out of the wall of the DV,
fit new one, smear some of the red grease inside the DV, put the new piston and spring in and refit,
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.