Audi TT Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
45 Posts
Discussion Starter · #1 ·
I have just bought myself a cable and some software....

I successfully managed to program the alarm beep when locking the car but am having a problem re-programming the light settings on the instrument cluster.

I have read the how-to's and wonder if I am going wrong somewhere - when I click on control module 17 (instruments) and then click adaptations (10) I get into the channel selection box OK. However when I put in channel 19 the value shown is '10' not the 5 digit number that is described elsewhere i.e '10010'. I want to change it so that dials and needles are constantly lit and have tried entering '40' and '40010' but these figures keep coming up with an error..

Getting frustrating so any help would be much appreciated.
 

·
Registered
Joined
·
4,917 Posts
What year is your car?

You can't change this on older cars, the cut off was 2000/2001 somewhere so if you have an older car you prob won't be able to do it
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top