[Mokorx]

To get rid of Basic setting, you need to do camera calibration.

This process required special board that has several black circles. It is to use to calibrate the camera to get the exact dimension of the line that show up on rearview screen.

I have use my rear camera without basic setting and have no issue with it.

So bottom line, I would suggest to leave it alone.

 

[Mokorx]

Kronox

Try this one.

http://wiki.ross-tech.com/wiki/index.php/Audi_Q7_(4L)_Back-Up_Camera

 

[Mokorx]

Kevin

I was not able to calibrate rearview camera using OBDeleven, but I am able to calibrate by ODIS + Calibration board.

The inputs are

1. Calibrate board height
2. Distant from hub center to board
3. Camera lens height from ground

 

[Mokorx]

Once I know what I am doing with ODIS. It took < 5 mins to do rear camera calibration from connect to complete calc.

 

[Mokorx]

Just Replica.

 

[Mokorx]

Just paste the value will not work. You need ODIS and calibration board (print out on paper or vinyl poster is fine).

I have tried calc. using OBDeleven and VCDS, but could not get the camera to calibrate. I live with basic setting error for one and a half year before getting ODIS & Calc board.

After calc.
1. No error
2. Camera display center line will match to TT center line. Before calibration camera center will offset to one side as camera is not center.
3. Steering guide line is more realistic to where the wheel going to be.

 

[Mokorx]

Calibration board link is in the link

https://www.audizine.com/forum/showthre ... alibration